CobraTurn^® T-30 Rotary Welding Turntable

• Compact high performance turntable
• Weld ground fault protection
• Adjustable LED illuminated control panel
• Linear single speed control knob with center push-button
• start, stop and jog functions
• Cam lever to lock table angle
• High frequency interference protection
• Easily bolts to any flat surface
• Appropriate for all welding applications

• Balanced Load Capacity – Horizontal:
  • 30 lbs, Horizontal

• Balanced Load Capacity – Vertical:
  • 15 lbs.

• Turntable Diameter:
  • 5”

• Degree Tilt:
  • 0° – 90°

• Speed Range R.P.M.:
  • 0.4 – 6

• Ground Capacity AMPS:
  • 400A 60% Duty Cycle

• Input Voltage:
  • 120 VAC 50/60 Hz

• Shipping Weight:
  • 14 lbs.

Genuine Parts Requirement
Use of non-genuine MK Products® consumables, parts, accessories, or coolants will void this warranty.

Warranty Coverage
MK Products® warrants that new and unused equipment is free from defects in materials and workmanship. This warranty does not apply to accessories or components manufactured by others, which are covered only by their original manufacturer’s warranties, if any.

Consumable or wear items with a normal service life of less than one (1) year — including tungsten, collets, brushes, conduits, gas cups, gas cup insulators, and contact tips — are not covered unless failure results from a defect in materials or workmanship.

Warranty Remedies
At its discretion, MK Products® will provide one of the following remedies:

• Repair

• Replacement

• Authorized reimbursement for repair or replacement performed at MK Products® (Irvine, CA)

Warranty Periods (from date of delivery to original user)

• Power Supplies & Wire Feed Cabinets: 3 years

• CobraMig350P Power Supply: 5 years

• Weld Heads, Coolers, Positioners, Push-Pull Guns: 1 year

• Spool Guns & Modules: 180 days

• Repairs, Exchanges & Parts: 90 days

Classification of equipment is at the sole discretion of MK Products®.

Claims & Returns
Failure must be reported in writing within 30 days.
Proof of purchase is required.
Returned equipment must be properly packaged.
MK Products® covers one-way domestic ground shipping only (excluding foreign markets).

Limitations
All implied warranties, including merchantability and fitness for a particular purpose, are disclaimed.
This warranty applies only to commercial and industrial users operated by trained personnel. It does not apply to consumers, and no reseller may extend consumer warranties.

Exclusive Warranty
This warranty is exclusive and supersedes all prior MK Products® warranties.

California Proposition 65 Warning
⚠️ WARNING: This product may expose you to chemicals, including those known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit www.P65Warnings.ca.gov

Electrical Safety Notice
This equipment must be installed, operated, and serviced by trained personnel. Improper use may result in electric shock, fire, serious injury, or equipment damage. Always follow the manufacturer’s instructions and applicable electrical codes.

Welding Safety Warning
Welding and cutting produce fumes, gases, heat, and arc radiation that can be hazardous. Always use proper ventilation, approved personal protective equipment (PPE), and safe work practices. Refer to the operator’s manual and OSHA welding safety guidelines.

Use Notice
This product is intended for professional and industrial use only. The manufacturer is not responsible for damage, injury, or loss resulting from misuse, improper installation, lack of maintenance, or unauthorized modification.

Compatibility Notice
This product is designed for use with approved system components. Use with non-approved or incompatible equipment may affect performance, safety, and warranty coverage.

Specifications Disclaimer
Product specifications, features, and availability are subject to change without notice.

All trademarks and registered trademarks are property of their respective owners.